-
Functions
This equipment can handle 1, 2 or 4 drums depending on the usage, by clamping drums from both sides with its arms.
-
Use
This equipment is suitable for handling drums and cylindrical cargoes (used at a site or facility where drum-type cargoes are handled, such as petrochemical products, paints, ink and adhesives).
-
Type
Rotary
| Applications (t) | Range(mm) Open ~ Close |
Arm Height Length (mm) |
Clamp Stroke (O) Left Right |
Clamping Time (O) OPEN CLOSE |
Drum Load | Weight (kg) |
|---|---|---|---|---|---|---|
| 2.2 / 3.0 | 450 ~ 1,650 | 215 / 1,000 | 600 / 600 | 3.5 / 3.0 | 4 | 575 |
| 3.5 / 4 | 680 ~ 2,200 | 540 / 1,200 | 760 / 760 | 4.5 / 4.5 | 4 | 960 |
| 4.5 | 680 ~ 2,200 | 540 / 1,200 | 760 / 760 | 4.5 / 4.5 | 4 | 960 |
-
Functions
This equipment can transport or load/unload a standing drum by biting it with its teeth, which are shaped like an eagle's claw. It can be easily attached and detached because it is connected with pins. Usual fork work is also available when it is removed.
-
Use
This equipment is suitable for handling drums and cylindrical cargoes (used at a site or facility where drum-type cargoes are handled, such as petrochemical products, paints, ink and adhesives).
-
Type
Basic (for 1 or 2 drums), Side shift combination
| Applications (t) | Fork Length (mm) | Slot Width (mm) | Drum Load | Weight (kg) |
|---|---|---|---|---|
| 1.5 ~ 2.5 | 1,200 up to | 585 | 1 ~ 2 | 75 |
| 2.0- ~ 3.0 | 1,200 up to | 585 | 1 ~ 2 | 80 |
| 3.5- ~ 4.5 | 1,200 up to | 585 | 1 ~ 2 | 85 |
*The Length of the drum picker can be adjusted according to the fork's specifications.
*The Length of the drum picker can be adjusted according to the fork's specifications.
-
Functions
A bucket has been added to the hinged fork to serve as a small loader. The bucket can be easily attached and detached because it is connected with pins. Usual fork work is also available when it is removed.
-
Use
This equipment is suitable for transporting or loading/unloading powder type raw material cargoes (chemical plants, sand yards, feed plants and grain loading docks), such as chemical fertilizers, sand, feed, coal and grains.
-
Type
Basic, Side shift combination
| Applications (t) | Loading Capacity (kg) | Bucket Width (mm) |
Dumping Angle (degree) Top Bottom |
Bucket Capacity (m²) Flat Heaping |
Weight (kg) |
|---|---|---|---|---|---|
| 2.0 / 2.5 | 1,230 / 1,604 | 1,550 | 33 / 42 | 0.6 / 0.7 | 588 |
| 3.0 | 1,910 | 1,550 | 33 / 42 | 0.6 / 0.7 | 624 |
| 3.5 | 2,372 / 2,770 | 1,850 | 33 / 42 | 0.9 / 1.0 | 880 |
| 4.0 / 4.5 | 2,997 | 1,850 | 33 / 42 | 0.9 / 1.0 | 880 |
| 5.0 / 7.0 | 2,900 / 4,313 | 2,100 | 33 / 42 | 1.0 / 1.1 | 1,230 |
-
Functions
Cylindrical cargoes can be transported or loaded by dumping the fork up and down.
-
Use
This equipment is suitable for transporting and loading small logs, pipes and bricks (wood yards, sawmills, brick factories).
-
Type
Basic, Side shift combination
| Applications (t) | Loading Capacity (kg) | Dumping angle (degree) Top Bottom |
Outer fork opening Width (mm) |
Weight (kg) |
|---|---|---|---|---|
| 2.0 / 2.3 | 1,334 / 1,708 | 33 / 42 | 1,070 | 356 |
| 3.0 / 3.3 | 2,016 | 33 / 42 | 1,100 | 392 |
| 3.5 / 4.0 | 2,516 / 2,914 | 33 / 42 | 1,650 | 576 |
| 4.5 | 3,137 | 33 / 42 | 1,650 | 576 |
| 5.0 / 7.0 | 3,093 / 4,506 | 33 / 42 | 2,050 | 854 |
-
Functions
This equipment can transport cargoes even on uneven road surfaces by pressing and securing the cargo using the upper pressing plate (cover).
-
Use
1-pallet, 2-pallet, 3-pallet and shift type can be added depending on the use or application. Suitable for beverage, liquor and corrugated cardboard companies, glass factories, pharmaceutical companies, etc.
-
Type
1, 2, 3-pallet(Side shift combination type is supported)
| Applications (t) | Loading Capacity (kg) | Pressing plate size Width x Length (mm) |
Opening Range (mm) | Weight (kg) | Item |
|---|---|---|---|---|---|
| 1.5 / 1.8 | 1,169 / 1,435 | 850 X 850 | 1,200 ~ 2,300 | 315 | 1 pallet |
| 2.0 / 2.5 | 1,610 / 2,058 | 850 X 850 | 1,200 ~ 2,300 | 328 | 1 pallet |
| 3.0 | 2,488 | 850 X 850 | 1,250 ~ 2,350 | 360 | 1 pallet |
| 3.0 / 3.5 | 2,163 / 2,581 | 750 X 950 | 1,200 ~ 2,300 | 800 | 2 pallet |
| 4.5 | 3,659 | 750 X 950 | 1,200 ~ 2,300 | 870 | 2 pallet |
| 4.5 / 5.0 | 3,313 / 3,750 | 950 X 1,050 | 1,200 ~ 2,200 | 955 | 3 pallet |
*The opening range and pressing plate size can be adjusted.
*The opening range and pressing plate size can be adjusted.
-
Functions
This equipment can clamp a cargo from both sides without forks by attaching it with arms of various sizes. A rubber pad can be attached to the arm depending on the condition of the cargo's surface.
-
Use
This equipment can handle raw cotton, wool and pulp and is suitable for unloading containers at a port.
-
Type
Double fork positioner, Single fork positioner, Shift type
| Applications (t) | Loading Capacity (kg) |
Distance between arms (mm) |
Pressing plate size Width x Length (mm) |
Weight (kg) |
|---|---|---|---|---|
| 1.5 / 1.8 | 980 / 1,230 | 600 ~ 1,800 | 1,000 X 425 | 485 |
| 2.0 / 2.5 | 1,375 / 1,850 | 600 ~ 1,800 | 1,000 X 425 | 530 |
| 3.0 | 2,250 | 600 ~ 1,800 | 1,000 X 425 | 600 |
| 3.5 / 4.0 | 2,500 | 600 ~ 1,800 | 1,200 X 425 | 770 |
| 4.5 | 3,290 | 800 ~ 2,000 | 1,200 X 425 | 830 |
*The opening range and pressing plate size can be adjusted.
*The opening range and pressing plate size can be adjusted.
-
Functions
This equipment can transport, load and unload by clamping and turning circular cargoes.
-
Use
This equipment is suitable for unloading and loading roll-type cargoes at factory plants, printing plants and newspaper companies.
-
Type
360° rotation (double fork positioner, single fork positioner), 180° stop type
| Applications (t) | Loading Capacity (kg) |
Distance between arms (mm) |
Arm Width (mm) | Weight (kg) |
|---|---|---|---|---|
| 1.5 / 1.8 | 852 / 1,078 | 250 ~ 1,150 | 700 | 559 |
| 2.0 / 2.5 | 1,228 / 1,602 | 250 ~ 1,150 | 700 | 559 |
| 3.0 | 1,687 | 250 ~ 1,350 | 800 | 820 |
| 3.5 | 2,116 / 2,486 | 260 ~ 1,520 | 1,000 | 910 |
| 4.5 | 2,539 | 260 ~ 1,830 | 1,000 | 970 |
*The distance between of arms for each application is a recommended specification.
*The distance between of arms for each application is a recommended specification.
-
Functions
As this equipment supports 360-degree rotation, it can spill Cargoes by rotating a steel box (chip container) with a fork insertion hole. Pallet work can also be performed, as with a general forklift.
-
Use
This equipment is suitable for unloading and transporting oil-soluble (liquid) objects at waste disposal, feed and food companies and foundries.
-
Type
Basic, Side shift combination
| Applications (t) | Loading Capacity (kg) | Max. Slot Width (mm) | Weight (kg) |
|---|---|---|---|
| 2.2 / 3.0 | 1,388 / 1,799 | 1,020 | 305 |
| 3.0 | 2,209 | 1,060 | 320 |
| 3.5 / 4.0 | 2,844 / 3,295 | 1,300 | 348 |
| 4.5 | 3,343 | 1,600 | 573 |
| 5.0 / 7.0 | 3,583 / 5,238 | 1,600 | 573 |
*Take care of avoiding safety accidents when the fork fixing device is not available.
*Take care of avoiding safety accidents when the fork fixing device is not available.
-
Functions
This equipment can transport a cargo by clamping it from the side with its wide arm.
-
Use
This equipment is effective when handling cargoes that are vulnerable to impact or pressure, such as electronic products, confectionaries and boxed products.
-
Type
Double fork positioner, Single fork positioner
| Applications (t) | Loading Capacity (kg) | Distance between arms (mm) | Arm Length x Height(mm) |
Weight (kg) |
|---|---|---|---|---|
| 1.5 / 1.8 | 865 / 1,150 | 600 ~ 1,800 | 1,200 X 1,000 | 510 |
| 2.0 / 2.5 | 1,380 / 1,820 | 600 ~ 1,800 | 1,200 X 1,000 | 510 |
| 3.0 | 2,320 | 600 ~ 1,800 | 1,200 X 1,000 | 520 |
*The distance between arms and arm size can be adjusted.
*The distance between arms and arm size can be adjusted.
-
Functions
This type of equipment is for general shipping out ice blocks from ice warehouses. The mast-structured boom of the forklift extends forward and takes ice out of ice warehouses by clamping it with the pin of the clamp.
-
Use
Ice factories and other companies
-
Type
Basic type (mainly mounted on the electric forklift)
| Applications (t) | Loading Capacity (kg) | Taking-out quantity Forward/Backward |
Clamping tilt Angle (degree) |
Bucket Dimension W x L x H(mm) |
Weight (kg) |
|---|---|---|---|---|---|
| 2.2 / 3.0 | 1,030 / 1,500 | 500 | 45 | 1,350 X 1,000 X 220 | 750 |
| 3.0 / 3.2 | 1,980 / 2,110 | 500 | 45 | 1,350 X 1,000 X 220 | 750 |
-
Functions
This equipment can carry out pallet work at ordinary times, like a general forklift and can also perform clamping work when necessary. Various products can be clamped by adjusting the slot width of the fork.
-
Use
Effective when handling steel cargoes, textile products and long cargoes.
-
Type
Double fork ositioner, Single fork positioner, Rotary type (2 or 4 fork clamps)
| Applications (t) | Loading Capacity (kg) | Slot Width (mm) | Weight (kg) |
|---|---|---|---|
| 2.2 / 3.0 | 1,390 / 1,745 | 600 ~ 1,800 | 450 |
| 3.0 | 2,149 | 600 ~ 1,800 | 450 |
| 3.5 / 4.0 | 2,665 / 3,096 | 600 ~ 2,200 | 650 |
| 4.5 | 3,337 | 600 ~ 2,200 | 650 |
*Slot width and arm size can be adjusted.
*Slot width and arm size can be adjusted.
-
Functions
This equipment is designed to push a cargo to the push plate and load it after removing the pallet from the truck or container. The fork attached to the side wraps the loaded cargo to prevent shape change.
-
Use
This equipment is effective for workplaces where bags are loaded in multiple layers, which can collapse easily. Boxed cargoes are shipped out without a pallet and expensive process pallets are collected (mainly logistics for petrochemical products).
-
Type
Combined function of rotation, shifting, pushing and clamping
| Applications (t) | Loading Capacity (kg) | Push-plate Size(mm) Width X Height |
Range of Top to Bottom(mm) Min~Max |
Push Stroke (mm) |
Shift Amount | Weight (kg) |
|---|---|---|---|---|---|---|
| 3.0 / 3.5 | 1,990 | Width950 X Height850 | 750 ~ 1,300 | 1,050 | 150 | 1,100 |
| 3.5 / 4.5 | 1,990 | Width1,000 X Height850 | 950 ~ 1,500 | 1,300 | 150 | 1,200 |
-
Functions
It is easy to set the spacing during pallet work as this forklift's carriage moves to the left and right. Even if the forklift does not enter the fork hole, work can be performed in a stopped state without moving the forklift forward or backward.
-
Use
Efficient when working in a limited space such as a warehouse or container.
-
Type
Basic
| Applications (t) | Loading Capacity (kg) | Slot Width (mm) | Shift Stroke (mm) | Weight (kg) |
|---|---|---|---|---|
| 2.2 / 3.0 | 1,850 / 2,340 | 1,020 | 202 | 100 |
| 3.0 | 2,790 | 1,060 | 202 | 120 |
| 3.5 / 4.0 | 3,250 | 1,300 | 250 | 155 |
| 4.5 | 4,200 | 1,600 | 250 | 255 |
| 5.0 / 7.0 | 4,420 / 6,400 | 1,990 | 300 | 400 |
-
Functions
Work efficiency can be improved and working hours reduced by adjusting the spacing of the forklift’s fork from the driver's seat.
-
Use
Effective for various pallet and machine relocation works.
-
Type
Double fork positioner, Single fork positioner, double fork positioner + Shift combined type
| Applications (t) | Inner diameter | Outer diameter | Diameter | Type and stroke (mm) |
|---|---|---|---|---|
| 2.2 / 3.0 | Φ50 | Φ60 | Φ30 | Single wheel(395), Double wheel(565) |
| 3.0 | Φ50 | Φ60 | Φ30 | Single wheel(395), Double wheel(560) |
| 3.5 | Φ45 | Φ55 | Φ30 | Single wheel(505), Double wheel(630) |
| 4.5 | Φ45 | Φ55 | Φ30 | Double wheel(630) |
| 5.0(Bar) | Φ30 | Φ40 | Φ22 | Double wheel(815) |
| 7.0(Bar) | Φ30 | Φ40 | Φ22 | Double wheel(800) |
| 5.0 | Φ80 | Φ80 | Φ40 | Double wheel(800) |
| 7.0 | Φ80 | Φ80 | Φ40 | Double wheel(800) |
-
Functions
This equipment can be used as a forklift by mounting a carriage and a fork after removing its the bucket of the wheel loader or skid loader.
-
Use
This equipment can be used in the landscaping and construction industries, as well as at industrial factories and seedling farms.
-
Type
Basic
| Applications (t) | Loading Capacity (kg) | Overall Width x Overall Height (mm) |
Weight (kg) |
|---|---|---|---|
| HL370/ HL390 | 650 / 850 | 1,195 X 950 | 98 |
-
Functions
You can use by installing this equipment and removing the bucket of a skid loader. Dedicated work equipment that can sweep stones and other materials left after road construction work using a brush and then, load or transport. General bucket work can also be performed after removing the sweeper.
-
Use
Suitable for parking lots, motorways, sidewalks, warehouses, loading docks, etc.
-
Type
Basic
| Applications (t) | Brush Diameter (mm) | Brush Length (mm) | Overall Width (mm) | Overall Length (mm) | Weight (kg) |
|---|---|---|---|---|---|
| HL370/ HL390 | 600 | 1,860 | 2,056 | 1,295 | 435 |